| Author |
Message |
|
PeterB
Joined: Fri Jun 19, 2015 10:35 am
Posts: 14
Car(s): Isuzu 117 Coupe, 2015 Kluger
|
Hi Guys,
Thought I would create separate topics for each question incase people need to search the forum for it in the future.
I am trying to figure out what size wheels I can fit under the wheel arches of a 1974 Isuzu 117 Coupe PA95 XT (Yes I will keep stock + hub caps in warehouse for certain events). The car came with the original factory hub caps and I measured the current steel rims and they measured +35 offset.
Wheels: Watanabe Type R
Now the rears I wanted to fit the widest 15x8/8.5/9 with +0 Offset if I can as the rear guards are naturally pumped out already. The fronts well thats the headache I think, as with the +35 offset of the stock steelies the wheel literally sits on flush with the guard (attached image to see the difference between the front and rear) and I doubt I can fit 15x7 +20 offset unless the hub & double wishbone can be changed :S
Any info is greatly appreciated as I don't want to order the wrong wheels.
Regards
Pete
Attachments:
117_blankedplate.jpg [ 460.98 KiB | Viewed 16496 times ]
|
| Sun Jun 21, 2015 8:23 am |
|
|
|
PeterB
Joined: Fri Jun 19, 2015 10:35 am
Posts: 14
Car(s): Isuzu 117 Coupe, 2015 Kluger
|
Just realised there is a dedicated wheel section, admins please move if this should under there 
|
| Sun Jun 21, 2015 8:24 am |
|
|
|
Stickman
Joined: Fri Apr 10, 2009 11:29 pm
Posts: 1524
Location: Kallangur, Brisbane QLD
Car(s): 3x1965 PR20(Donkey, Jenny n Bundy) 1 1969 PR20(Percy) 2 1968 PR20(Eugine n GT Donor) 1 1968 PR91 GT, 1 1965 Wasp
|
A 15x7 wheel with +20 offset should fit no worries as the more positive offset you have, the deeper inside the arch the wheel sits. I you go a +0 offset or a negative offset the wheel will have more dish and sit further out toward the arch.
_________________
1xB+1xE+2xL+1xE+2xT=BELLETT
RUST isn't a crime
www.gartdesign.com.au
|
| Sun Jun 21, 2015 10:08 am |
 
|
|
|
Farmer
Joined: Tue Oct 28, 2008 12:17 pm
Posts: 2612
Location: Rye Park, N.S.W.
Car(s): Doris, AuntyMary, Shrek, Jimmy; GT, Wasp, Flo & Sed unrestos; 65 Elf; 82 Rodeo, 60 TX550, 72 Sport, & a Sigma.
|
Warren, who flagged you down, is a wheel & tyre bloke. I'm sure he would enjoy a test fit with some options. Should be plenty available as they are the same pattern as Datsuns.
I personally wouldnt mess with the wishbones, parts are rare. Please dont think of flaring the guards, those lines are so sweet!
Cheers, Matt.
_________________
Life is far too short not to fill it with what you love. - Jackie French.[/size]
|
| Sun Jun 21, 2015 12:45 pm |
|
|
|
PeterB
Joined: Fri Jun 19, 2015 10:35 am
Posts: 14
Car(s): Isuzu 117 Coupe, 2015 Kluger
|
Sorry I meant I wanted to roll the guards , the inner lip for more clearance
|
| Sun Jun 21, 2015 1:03 pm |
|
|
|
Asroc66
Joined: Tue Jun 18, 2013 5:09 am
Posts: 428
Location: Sydney NSW
Car(s): PR91 1967 GT, PR20 1966 1/2 with GT Goodies
|
_________________
To increase the fun, add a hair dryer
|
| Wed Jun 24, 2015 2:19 am |
|
|
|
PeterB
Joined: Fri Jun 19, 2015 10:35 am
Posts: 14
Car(s): Isuzu 117 Coupe, 2015 Kluger
|
$2400 for a second hand set? They are cheaper new
|
| Wed Jun 24, 2015 9:47 am |
|
|
|
Asroc66
Joined: Tue Jun 18, 2013 5:09 am
Posts: 428
Location: Sydney NSW
Car(s): PR91 1967 GT, PR20 1966 1/2 with GT Goodies
|
Surely not!!!!!!
I read it as $680 per set of 4....
Did u email the dude?
I know you pay for the name but if you are right that's just crazy.
They are the period mags to have..... Would love a set that's for sure
J
_________________
To increase the fun, add a hair dryer
|
| Wed Jun 24, 2015 10:52 am |
|
|
|
Farmer
Joined: Tue Oct 28, 2008 12:17 pm
Posts: 2612
Location: Rye Park, N.S.W.
Car(s): Doris, AuntyMary, Shrek, Jimmy; GT, Wasp, Flo & Sed unrestos; 65 Elf; 82 Rodeo, 60 TX550, 72 Sport, & a Sigma.
|
Surely its $680 for the set, though there is a 1 in the quantity box. Not a pleasant seller by the blurb.  I'm not a fan of black wheels, but to each his own. There are heaps of choices that would fit under the stock guards. Cheers, Matt.
_________________
Life is far too short not to fill it with what you love. - Jackie French.[/size]
|
| Wed Jun 24, 2015 11:39 am |
|
|
|
PeterB
Joined: Fri Jun 19, 2015 10:35 am
Posts: 14
Car(s): Isuzu 117 Coupe, 2015 Kluger
|
Couldn't resist new badges are my weak spot.
|
| Mon Jul 06, 2015 10:53 am |
|
|
|
Stickman
Joined: Fri Apr 10, 2009 11:29 pm
Posts: 1524
Location: Kallangur, Brisbane QLD
Car(s): 3x1965 PR20(Donkey, Jenny n Bundy) 1 1969 PR20(Percy) 2 1968 PR20(Eugine n GT Donor) 1 1968 PR91 GT, 1 1965 Wasp
|
VERY nice
_________________
1xB+1xE+2xL+1xE+2xT=BELLETT
RUST isn't a crime
www.gartdesign.com.au
|
| Tue Jul 07, 2015 8:17 am |
|
|
