|
bellett deluxe versus standard bellett
Author |
Message |
BELLQLD
Joined: Tue Feb 10, 2009 8:22 am Posts: 240 Location: gold coast
Car(s): 67 BELLETT SEDAN. 66 AUTO SEDAN PARTS CAR.HAD GT NOW AT ORPHANAGE
|
hi guys i am trying to work out the difference between a standard and a deluxe please shed some light if you can Am i correct in following tinted windows , chrome door surrounds , chrome oiece in between doors , deluxe badge on both front gaurds and on the boot {rhs} some later had the word deluxe on a badge ? full chrome wheel trims , optional white walls, inside had a radio, seatbelts , carpets, and a clock sometimes in the dash and some on the dash.2 speed washers this is the tricky bit did they have different wiring or just added to the existing loom also did they have an electric pump like the gt.s and finally a heater which had a pull out 3 position lever where the existing controls are Is there anything ive missed . i know that dave will know all this imfo regards davo in qld
|
Sat Jan 09, 2010 5:36 am |
|
|
dave
Joined: Thu Sep 11, 2008 9:15 am Posts: 1991
Car(s): 1965 Wasp, 1966 Bellett, 1967 Bellett, 1969 Florian, 1973 Bellett GTR, 1976 Buick Opel by Isuzu, 1978 Gemini van
|
Hi Dave,
The trim and brightwork info looks about right as far as I know.
tinted windows stainless steel door window frames & trim plate on B-pillar deluxe badging on front quarters (1969-model has small 'deluxe' badge on back different to the shield on the side) wheelcovers radio carpets instead of mats clock on top of dashboard (early dash) clock in dashboard next to speedo (1966.5 onwards) 2 speed wipers - I've seen the 2-speed wipers in a non-Deluxe as well
I'm not sure if whitewalls were an actual option, nor can I tell you for certain if they had seatbelts.
Can anybody help Dave in Queensland determine if the wiring was different? I simply don't know.
Cheers,
Dave
_________________My latest automotive articles and original content shared here:https://www.facebook.com/garageofawesomeStreet Machine! Unique Cars! Awesome!
|
Mon Jan 11, 2010 2:13 am |
|
|
oz_toffa
Joined: Fri Sep 26, 2008 6:16 am Posts: 1157 Location: Adelaide north near the hills.
Car(s): Roman Red 1965 Sedan, Mint 67 Sedan Auto, 1967 GT , 1.5x 1967 sedans, 1968 Deluxe Sedan, 1965 Wasp Ute (Resto project)
|
Also inside the trim work was different on the seats both front and rear, the front seat rail system is a dual lock system as compaired to single lock on the 67 sedan. The seat mounts are also different as we tried to swap out seats between 67 sedan and deluxe sedan. The wiring for the switch is same as far as i know but you have to also fit the dual-speed wiper motor for the system to work. Also think the water bottle was the standard bag unit with the vacuum pump manual squirter. Only GT got the electric unit. Clock was in all the 68-69 models but the rarer 66-67 deluxe may have not got the clock. my 2 cents worth.
Chris
_________________ So many toys and so little time to play!!
|
Mon Jan 11, 2010 2:24 am |
|
|
dave
Joined: Thu Sep 11, 2008 9:15 am Posts: 1991
Car(s): 1965 Wasp, 1966 Bellett, 1967 Bellett, 1969 Florian, 1973 Bellett GTR, 1976 Buick Opel by Isuzu, 1978 Gemini van
|
A perv at the brochures in the brochure section may help as well.
_________________My latest automotive articles and original content shared here:https://www.facebook.com/garageofawesomeStreet Machine! Unique Cars! Awesome!
|
Mon Jan 11, 2010 3:52 am |
|
|
P.R.90
Joined: Tue Jan 27, 2009 5:52 am Posts: 205
Car(s): 66 GTPR90
|
Re interior deluxe sedan also had GTstyle arm rests on front & sometimes on rear doors Rear doors seemed optional as to mood of person fitting but definately on front doors Also 67-68 deluxe had woodgrain dash facia same as GT& hence are inter changable with same eg clock hole in dash facia becomes oil pressure guage cheers ken
|
Mon Jan 11, 2010 4:52 am |
|
|
dave
Joined: Thu Sep 11, 2008 9:15 am Posts: 1991
Car(s): 1965 Wasp, 1966 Bellett, 1967 Bellett, 1969 Florian, 1973 Bellett GTR, 1976 Buick Opel by Isuzu, 1978 Gemini van
|
Oh yeah I forgot about that! Ross's 1969 Deluxe has the arm rests and I remember seeing that on other earlier deluxes.
Plus the woodgrain.... class!
_________________My latest automotive articles and original content shared here:https://www.facebook.com/garageofawesomeStreet Machine! Unique Cars! Awesome!
|
Mon Jan 11, 2010 5:44 am |
|
|
BELLQLD
Joined: Tue Feb 10, 2009 8:22 am Posts: 240 Location: gold coast
Car(s): 67 BELLETT SEDAN. 66 AUTO SEDAN PARTS CAR.HAD GT NOW AT ORPHANAGE
|
hi guys thanks for all your replies ..i went into my pandoras box and found a twin switch the loom has 4 pins and 4 wires they look identical one is coded with twin switch OS-A1 W -8 the other single speed OS-D1 W-7 .. 3 wires a bit of useless imfo but someone may need it someday i will hook it up tomorrow regards dave in qld
|
Mon Jan 11, 2010 6:54 am |
|
|
PR91
Joined: Tue Sep 16, 2008 11:54 am Posts: 2544
|
another one... 69 deluxe has a small ashtray for the rear passenger mounted to the trans tunnel, just behind the handbrake.
|
Fri Jan 15, 2010 6:11 am |
|
|
2ldohc
Joined: Wed Sep 10, 2008 1:22 pm Posts: 603 Location: Adelaide, Australia
Car(s): 1968 Isuzu Bellett Deluxe (Polynesian Blue), 1974 Datsun 240z, 1970 Datsun Fairlady SRL311, 1966 Prince Skyline
|
Don't they all have that ash tray, not just the deluxe's?
_________________1966 Prince Skyline GT-B 1968 PR20 Bellett Deluxe (flat lights) 1970 SRL311 Datsun Fairlady 1971 S30 Datsun 240Z - Race car 1972 S30 Datsun 240Z For more info, articles and pictures visit http://GarageofAwesome.com.au
|
Tue Feb 09, 2010 2:27 am |
|
|
PR91
Joined: Tue Sep 16, 2008 11:54 am Posts: 2544
|
nope, just the deluxe. my 69 deluxe it, as did the other ones i've seen. all the standards never had it, but the earlier deluxes may have. GT's definitly never had it either.
|
Tue Feb 09, 2010 6:44 am |
|
|
bellett65
Joined: Sun Oct 12, 2008 7:14 am Posts: 157 Location: Cranbourne Victoria
Car(s): Isuzu DMax LSU, Isuzu MUX, 1979 117 Coupe.
|
My 68 deluxe had the ashtray in the back. It was first reg in December 1968. It was a bit of a crossdresser as it had 1969 inner guards. and quite a few 69 bits and bobs. I think it was maybe one of the last off the line before changeover. I have seen this on some early Holdens and Fords.
Peter
_________________ Since the day of my birth, my death began its walk. It is walking towards me, without hurrying
|
Tue Feb 09, 2010 10:31 am |
|
|
dave
Joined: Thu Sep 11, 2008 9:15 am Posts: 1991
Car(s): 1965 Wasp, 1966 Bellett, 1967 Bellett, 1969 Florian, 1973 Bellett GTR, 1976 Buick Opel by Isuzu, 1978 Gemini van
|
My 1966.5 has gone the central ashtray.
I thought it must have been standard fitment to all bucket-seated sedans.
_________________My latest automotive articles and original content shared here:https://www.facebook.com/garageofawesomeStreet Machine! Unique Cars! Awesome!
|
Tue Feb 09, 2010 11:56 am |
|
|
Farmer
Joined: Tue Oct 28, 2008 12:17 pm Posts: 2612 Location: Rye Park, N.S.W.
Car(s): Doris, AuntyMary, Shrek, Jimmy; GT, Wasp, Flo & Sed unrestos; 65 Elf; 82 Rodeo, 60 TX550, 72 Sport, & a Sigma.
|
I don't think I've ever seen a car without the rear ashtray - all mine have 'em, incl the '65 parts donors. 'Barn Find' has one in the back of the front bench. Doris also has 3 passenger grab handles in the roof (standard car door pulls). But no dashtop clock, eved though the handbook shows one! Cheers, Matt.
_________________ Life is far too short not to fill it with what you love. - Jackie French.[/size]
|
Tue Feb 09, 2010 12:43 pm |
|
|
GTtoo
Joined: Sun Feb 01, 2009 2:51 am Posts: 1034
Car(s): 1964 GT Isuzu Bellett
|
I guess when your'e using the ashtray, ya' not bothered about what time it is !!
Here's a thought PR91, what about an ashtray mounted on the drive shaft well on GT's, Deluxe style.
Gotta check out that ashtray at all Japan, 2ldohc.....
B.
|
Tue Feb 09, 2010 12:56 pm |
|
|
PR91
Joined: Tue Sep 16, 2008 11:54 am Posts: 2544
|
GTtoo wrote: Here's a thought PR91, what about an ashtray mounted on the drive shaft well on GT's, Deluxe style.
Gotta check out that ashtray at all Japan, 2ldohc.....
B. of all the belletts i've had (standard's and deluxe's), the deluxe's were the only ones with it "still" fitted, but as most of these cars were usually wrecks when i got them (for parts), the tray could have been pilfered before i got to them too. i know the race car definitly didnt have the tray or the mount there when i stripped it to rebuild either, and it was a road car when i got it. i think it'll be too far back towards the rear seat, B, and just be a pain to step over, as the handbrake in a GT is further back along the floor pan than what it is in a sedan. the sedan has a space there that it fits in perfectly, but the handbrake uses this space in the GT. reason is that the gearstick in the GT is further back than in a sedan, meaning they had to move the handbrake back as well.
|
Tue Feb 09, 2010 1:45 pm |
|
|
GTtoo
Joined: Sun Feb 01, 2009 2:51 am Posts: 1034
Car(s): 1964 GT Isuzu Bellett
|
Yeah PR91, I had a quick look last night, and yes, could mount an ashtray but you would certainly end up kicking it around the back seat floor pan !!
had no idea the mounting distances were different in GT's for gearsticks and hand brakes,... interesting
B.
|
Wed Feb 10, 2010 2:11 pm |
|
|
Farmer
Joined: Tue Oct 28, 2008 12:17 pm Posts: 2612 Location: Rye Park, N.S.W.
Car(s): Doris, AuntyMary, Shrek, Jimmy; GT, Wasp, Flo & Sed unrestos; 65 Elf; 82 Rodeo, 60 TX550, 72 Sport, & a Sigma.
|
I don't require the conventional use for the ashtray, but it has another - It props a 1 litre drink bottle between the seats & holds a Mars bar! mmmmmm, so chooooclaateeeee....aaaarrccggg..... Gotta go - cuppa time! Matt.
_________________ Life is far too short not to fill it with what you love. - Jackie French.[/size]
|
Fri Feb 12, 2010 9:35 pm |
|
|
KJB
Joined: Fri Nov 07, 2008 9:05 am Posts: 620 Location: Western Victoria
Car(s): Bellett GT, Bellett Sedan, Prince Skyline GT, Porsche tractor, Lanz Bulldog, 996 Carrera 4,Prince Miler,
|
What about chocolate and a good coffee? KB
_________________ Around here the Laws of Physics and Reality are strictly enforced !
|
Fri Feb 12, 2010 10:05 pm |
|
|
RobSA
Joined: Sat Sep 26, 2009 10:55 am Posts: 580 Location: Adelaide
Car(s): BA Falcon, 68 Bellett
|
Cuppa tea and good chocolate is my vote, lol.
As people are talking about handbrakes, just wondering if the mechanism under the floor is the same (ie distnace mountings etc) is the same for bench seat and bucket seat. Havent had a chance to look under a bucket seat car yet, and i want to move my handbrake to the centre.
Cheers Rob
_________________ If you can't fix it with a hammer, you have an electrical problem!
|
Sat Feb 13, 2010 12:45 am |
|
|
Farmer
Joined: Tue Oct 28, 2008 12:17 pm Posts: 2612 Location: Rye Park, N.S.W.
Car(s): Doris, AuntyMary, Shrek, Jimmy; GT, Wasp, Flo & Sed unrestos; 65 Elf; 82 Rodeo, 60 TX550, 72 Sport, & a Sigma.
|
Only thing that improves a Mars Bar is a good Coffee, mate! Might have to watch for one of those machines! Hey Rob, I'll have to check out the difference. (I know G.T. is different) I'd have a spare centre mechanism if you need it. Cheers, Matt.
_________________ Life is far too short not to fill it with what you love. - Jackie French.[/size]
|
Thu Feb 18, 2010 12:20 pm |
|
|
Who is online |
Users browsing this forum: No registered users and 9 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|
|