 |
|
Page 1 of 1
|
[ 10 posts ] |
|
Steering, ball joint and tie rod end boots
| Author |
Message |
|
BrisBellett
Joined: Thu Oct 16, 2008 10:51 pm
Posts: 147
Location: No fixed address - caravaners
Car(s): '65 Wasp w/Florian G161, '66 Hillman Super Minx Wagon(now under daughter's ownership), F350 Super Duty, Jayco Caravan
|
Hi, Most likely someone has published this info before but here it is again - just in case:
Steering rack boot - Repco Universal fit - URPB
Tie rod end boots and steering rack end boot - TE2
Ball joint boots - TE8
Cheap spring ties are just that - cheap - they break easily so some had standard cable ties to secure.
cheers, clyde
|
| Fri Oct 24, 2008 6:56 am |
|
|
|
GTtoo
Joined: Sun Feb 01, 2009 2:51 am
Posts: 1034
Car(s): 1964 GT Isuzu Bellett
|
Ta Bris,
Exactly what I'll be looking for next. Any idea on were to go for rack ends and tie rods, also worn ball joints. Also need bushes, and rubbers for the rack mounts which are non existant, thus moving the whole rack by about 5mm to add extra slop.
Cheers, from " tired and shakey front end" Bruno.
|
| Thu Feb 12, 2009 1:43 pm |
|
|
|
RobSA
Joined: Sat Sep 26, 2009 10:55 am
Posts: 580
Location: Adelaide
Car(s): BA Falcon, 68 Bellett
|
Have a guess what these are ?  Yes, they are brand new.  Cheers Rob Rebonded engine mounts can be got to 
Attachments:
Image001 - Copy.jpg [ 22.85 KiB | Viewed 19050 times ]
_________________
If you can't fix it with a hammer, you have an electrical problem!
|
| Wed Mar 03, 2010 10:30 am |
|
|
|
1968GT
Joined: Tue Dec 23, 2008 2:32 am
Posts: 1266
Location: MUDGEE. NSW
Car(s): 1968 PR91 Bellett GT. 2014 ISUZU MU-X, 2016 Jayco 22' Starcraft Caravan, 2013 KIA Reo shopping trolley!!
|
Rob,
Where do get the engine mounts re bonded please?
Is it worth having a quantity done for a number of us and would it be any cheaper??
I would be interested in at least 2 pair of engine mounts as spares.
Dave M.
_________________
BELLETT GT, BELLETT SEDAN, MU-X, D MAX, or ANY ISUZU, or A FORD XR6 TURBO, Premium motoring!!!!
|
| Wed Mar 03, 2010 9:24 pm |
|
|
|
gt orphanage
Joined: Fri Mar 20, 2009 8:23 am
Posts: 1816
|
I would support this order looking at 6 mounts
Greg
|
| Wed Mar 03, 2010 9:56 pm |
|
|
|
RobSA
Joined: Sat Sep 26, 2009 10:55 am
Posts: 580
Location: Adelaide
Car(s): BA Falcon, 68 Bellett
|
I'm not sure how quickly then can be turned around (ie delivered rebonded, sent out or picked up). I've asked to have two sets of engine mounts and two sets of rack rubbers in the next month. AJ posted this link awhile back ... viewtopic.php?f=36&t=574&p=3415&hilit=refurbished#p3415I rang him and went down there. I haven't had a price yet. Does it really matter? Much better than cutting up some other mounts. If you don't have a mount with the steel, Tony can make them up, but much better to take in your old mount. I will be getting another two done once the new ones have replaced the ones on the cars (does that make sense). Cheers Rob
_________________
If you can't fix it with a hammer, you have an electrical problem!
|
| Wed Mar 03, 2010 10:58 pm |
|
|
|
Glenn
Joined: Tue May 10, 2011 2:23 am
Posts: 2823
Location: Melb.
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
|
this is an old thread re steering rack rubbers...... where do they come from ?
glenn
_________________
'72 PR60 Sport
|
| Thu May 03, 2012 5:57 am |
|
|
|
RobSA
Joined: Sat Sep 26, 2009 10:55 am
Posts: 580
Location: Adelaide
Car(s): BA Falcon, 68 Bellett
|
Glenn all the details are in this post, the guy who makes the engine mounts also makes the steering rack rubbers
viewtopic.php?f=36&t=574&p=3415&hilit=refurbished#p3415
_________________
If you can't fix it with a hammer, you have an electrical problem!
|
| Fri May 11, 2012 11:40 am |
|
|
|
65bellett
Joined: Sun Oct 26, 2008 9:31 am
Posts: 234
Location: Melbourne, Australia
Car(s): 65 and 66 sedan
|
Cheers Brisbellett I just jumped on to ask about steering rack boots and you had all ready put up the answer. Who says owning a Bellett is a lot of hard work to find parts and keep on the road  _________________
|
| Sat Nov 16, 2013 3:10 pm |
|
|
|
Classic_Bellett
Joined: Mon Nov 24, 2014 9:58 pm
Posts: 4
|
A&A ENGINEERING
They specialise in standard and high performance Harmonic Balancers.
But they also specialise in Re-bonding rubber mounts, and all types of specialise rubber components.
The rubber is top quality! and they deal with anyone Australia wide.
Speak to Tony.
Attachments:
iglio.JPG [ 34.36 KiB | Viewed 16829 times ]
|
| Fri Nov 28, 2014 6:22 am |
|
|
|
|
Page 1 of 1
|
[ 10 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 6 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
|
