 |
| Author |
Message |
|
BELLETTPR10
Joined: Thu Sep 25, 2008 8:35 pm
Posts: 211
Location: Florida
Car(s): 1968 Bellett 1300 2dr, 06 Scion XA ,05 Chrysler PT Cruiser GT Turbo HO
|
Ari great dash photo it's nice to see a complete dash and what they look like the blue Bellett face plate looks cool ...  Thanks Mark
|
| Wed Oct 01, 2008 11:58 pm |
 
|
|
|
AriNojd
Joined: Thu Sep 25, 2008 5:35 pm
Posts: 18
Location: Finland
Car(s): Bellett GT -69, Bellett sedan -69, Bellett sedan -67, Impulse -85
|
 2ldohc wrote: AriNojd wrote: This is a picture of my -69 sedan interior. Here you can see the side defroster vents like everybody else in the world have in their Belletts  And yes, the hole at the center of the dash is for a radio. That blue faceplate with Bellett-logo was in sedan models -67-69 ( at least in Finland ). Ari I guess this is a base model 69 sedan going by the rubber floor mats and no cigarette lighter? You've got the wood grain dash when I think our base models got the grey dash but no clock? The 69 deluxe I have has the wood grain dash and a clock to the right of the combination guage (the left on mine as it's RHD, but you know what I mean!). I think my steering wheel must have been replaced at some point because it's looking more and more like the 69 model should have that steering wheel you have whereas mine has the older model, chrome horn ring one... Also, note for interest that your ignition is on the steering column... Yet another difference! Mine is still on the dash like BellettPR10's! Argh, why isn't there any consistency!! Good dash pic though, I'll post mine for comparison. Cheers, Ross. Ross -69 steering wheel (with black horn button ) and -66-68 steering wheel ( with chrome ) has different size shafts. If you change the steering wheel, you must change the steering saft too. Latest gray dash in here was in -68. After that base models ( only model imported I think ) has wood dash without clock, rubber mats, igniton switch in steering column etc. like this mine has. This is going to be an endless talking... Ari
|
| Thu Oct 02, 2008 7:46 am |
|
|
|
JT191
Joined: Wed Sep 24, 2008 10:05 am
Posts: 543
Location: 12,450 miles away from the Big Warehouse in Melbourne
|
AriNojd wrote:
-69 steering wheel (with black horn button ) and -66-68 steering wheel ( with chrome ) has different size shafts.
If you change the steering wheel, you must change the steering shaft too.
Ari
Seriously? This is interesting. I have seen the Gemini steering hub adapters used on the 1969 Bellett. And this is the same shaft spline pattern for PF, JT150/190, JT151/191, and even Piazza. That was the one thing in common for the 25 year span. But the 1968 has a different steering wheel spline pattern?
|
| Thu Oct 02, 2008 8:45 pm |
|
|
|
AriNojd
Joined: Thu Sep 25, 2008 5:35 pm
Posts: 18
Location: Finland
Car(s): Bellett GT -69, Bellett sedan -69, Bellett sedan -67, Impulse -85
|
JT191 wrote: AriNojd wrote:
-69 steering wheel (with black horn button ) and -66-68 steering wheel ( with chrome ) has different size shafts.
If you change the steering wheel, you must change the steering shaft too.
Ari
Seriously? This is interesting. I have seen the Gemini steering hub adapters used on the 1969 Bellett. And this is the same shaft spline pattern for PF, JT150/190, JT151/191, and even Piazza. That was the one thing in common for the 25 year span. But the 1968 has a different steering wheel spline pattern?  Left: -68. Right: -69. -68 is 1,5mm thicker than -69. Both has a steering lock. Ignition in column. I also did find one very early model ( without steering lock ) and it has same diameter than -68 shaft. That´s in here, don´t know how there  . Ari
|
| Fri Oct 03, 2008 9:32 am |
|
|
|
AriNojd
Joined: Thu Sep 25, 2008 5:35 pm
Posts: 18
Location: Finland
Car(s): Bellett GT -69, Bellett sedan -69, Bellett sedan -67, Impulse -85
|
BELLETTPR10 wrote: Front Grill & Emblem. Note the color coded [b]ISUZU[/b] Emblem matches to Car. My opinion for this is that the emblems were all baby-blue. At least -69-> emblems are same colour regardless of colour of the car.   Ari
|
| Sat Oct 04, 2008 9:03 am |
|
|
|
2ldohc
Joined: Wed Sep 10, 2008 1:22 pm
Posts: 603
Location: Adelaide, Australia
Car(s): 1968 Isuzu Bellett Deluxe (Polynesian Blue), 1974 Datsun 240z, 1970 Datsun Fairlady SRL311, 1966 Prince Skyline
|
Hi guys, Here's the dash photo that I promised from a previous post. Attachment:
File comment: 1969 Deluxe dash photo
Bellett Dash.JPG [ 222.36 KiB | Viewed 24796 times ]
As you can see it has the older style wheel even though this is a 1969 model year deluxe. I recon that it has the '68 style spline which would make sense looking at AriNorjd's photo above. This has steering lock but the ignition is still on the dash like the older model. Does anyone know what steering adaptor will fit the older hub? I've got a sports wheel here but I can't fit it as I don't have a boss kit to suite! Quote: My opinion for this is that the emblems were all baby-blue.
At least -69-> emblems are same colour regardless of colour of the car. I agree with you AriNorjd! I think that they are all that colour, before Isuzu settled on the red emblem. Cheers, Ross _________________1966 Prince Skyline GT-B 1968 PR20 Bellett Deluxe (flat lights) 1970 SRL311 Datsun Fairlady 1971 S30 Datsun 240Z - Race car 1972 S30 Datsun 240Z For more info, articles and pictures visit http://GarageofAwesome.com.au
|
| Thu Oct 09, 2008 11:00 am |
|
|
|
bellett65
Joined: Sun Oct 12, 2008 7:14 am
Posts: 157
Location: Cranbourne Victoria
Car(s): Isuzu DMax LSU, Isuzu MUX, 1979 117 Coupe.
|
I think from memory the early is the same as a Mazda hub.
_________________
Since the day of my birth, my death began its walk. It is walking towards me, without hurrying
|
| Mon Oct 13, 2008 5:11 am |
|
|
|
2ldohc
Joined: Wed Sep 10, 2008 1:22 pm
Posts: 603
Location: Adelaide, Australia
Car(s): 1968 Isuzu Bellett Deluxe (Polynesian Blue), 1974 Datsun 240z, 1970 Datsun Fairlady SRL311, 1966 Prince Skyline
|
bellett65 wrote: I think from memory the early is the same as a Mazda hub. Thanks Bellett65. Do you know which model? Early stuff or later? I have an '88 RX7 here I might swap that one over and give it a shot on the Bellett  Cheers, Ross _________________1966 Prince Skyline GT-B 1968 PR20 Bellett Deluxe (flat lights) 1970 SRL311 Datsun Fairlady 1971 S30 Datsun 240Z - Race car 1972 S30 Datsun 240Z For more info, articles and pictures visit http://GarageofAwesome.com.au
|
| Mon Oct 13, 2008 6:43 am |
|
|
|
redback
Joined: Sun Oct 05, 2008 10:21 pm
Posts: 528
Location: Darwin NT
Car(s): Isuzu Bellett, VG Commodore Ute, Custom Chopper
|
I have a Holden Commodore VP Boss to fit my sports steering wheel to my Bellett (1966/7)
I went to the local Autobarn (in Darwin) to find a Boss for it about 10 years ago - the guy behind the counter was not interested in letting me measure some of the boss adapters, because it was too hard for him (I did ask nicely) when that didn't work I asked "So you won't let me find one that fits my car so I can spend my money here" and he said "Nup". - I have never set foot back in Autobarn since. More fool him.
I went home pulled the sports wheel off my commodore to get a rough size and would you believe it - it slid on straight and true and has been there ever since.
|
| Mon Oct 13, 2008 9:45 pm |
|
|
|
2ldohc
Joined: Wed Sep 10, 2008 1:22 pm
Posts: 603
Location: Adelaide, Australia
Car(s): 1968 Isuzu Bellett Deluxe (Polynesian Blue), 1974 Datsun 240z, 1970 Datsun Fairlady SRL311, 1966 Prince Skyline
|
Cheers redback, I'll give that a shot _________________1966 Prince Skyline GT-B 1968 PR20 Bellett Deluxe (flat lights) 1970 SRL311 Datsun Fairlady 1971 S30 Datsun 240Z - Race car 1972 S30 Datsun 240Z For more info, articles and pictures visit http://GarageofAwesome.com.au
|
| Tue Oct 14, 2008 1:09 am |
|
|
|
PR91
Joined: Tue Sep 16, 2008 11:54 am
Posts: 2544
|
bellett65 is right.
early column splines are the same as RX4 and series I & II RX7.
the RX4 one is longer than the RX7, so the wheel is closer to you with an RX4 boss.
the wasp is the same as the early column. i have an RX7 one in my wasp.
late column splines are the same as TE gemini.
my race car has a late column in it. i put it in coz i already had the wheel for it that suited a TE.
|
| Wed Oct 15, 2008 8:26 am |
|
|
|
dave
Joined: Thu Sep 11, 2008 9:15 am
Posts: 1991
Car(s): 1965 Wasp, 1966 Bellett, 1967 Bellett, 1969 Florian, 1973 Bellett GTR, 1976 Buick Opel by Isuzu, 1978 Gemini van
|
That would explain why the Freegard Wasp here in Adelaide has a bugeye Mazda 323/Series 1 RX7 steering wheel on it... (with the 'Mazda' scratched off).
_________________My latest automotive articles and original content shared here:https://www.facebook.com/garageofawesomeStreet Machine! Unique Cars! Awesome!
|
| Thu Oct 16, 2008 5:57 am |
|
|
|
PR91
Joined: Tue Sep 16, 2008 11:54 am
Posts: 2544
|
dave wrote: That would explain why the Freegard Wasp here in Adelaide has a bugeye Mazda 323/Series 1 RX7 steering wheel on it... (with the 'Mazda' scratched off). got it in one, davo.
|
| Thu Oct 16, 2008 12:38 pm |
|
|
|
dave
Joined: Thu Sep 11, 2008 9:15 am
Posts: 1991
Car(s): 1965 Wasp, 1966 Bellett, 1967 Bellett, 1969 Florian, 1973 Bellett GTR, 1976 Buick Opel by Isuzu, 1978 Gemini van
|
Off topic Brett but I realised I was wrong about no Wasps being sold here in Adelaide; I bought a couple of workshop manuals, some other bits and pieces and Ross got a Florian Zippo lighter (!!!) off this old fella here in Adelaide who worked for a company or the government (can't remember, but unlikely to be the govt) and they had a few Belletts and a few Wasps as work vehicles. He was supervisor of the maintenence section, I reckon. So yeah, we did get some Wasps here!
_________________My latest automotive articles and original content shared here:https://www.facebook.com/garageofawesomeStreet Machine! Unique Cars! Awesome!
|
| Thu Oct 16, 2008 10:06 pm |
|
|
|
antus
Site Admin
Joined: Sat Sep 06, 2008 1:17 am
Posts: 208
Location: Adelaide
Car(s): Gemini TX Coupe G200W Delco EFI, Gemini TX sedan (SR20DET, track car), Dato 1200 Ute, Subaru Blitzen Wagon (4th gen)
|
PR91 wrote: late column splines are the same as TE gemini. Gemini TX-TG all had the same spline, so that'd mean any gemini hub would suit late model. I guess they never changed it when they stopped making Belletts and started making Isuzu Geminis.
|
| Thu Oct 16, 2008 11:41 pm |
|
|
|
BELLETTPR10
Joined: Thu Sep 25, 2008 8:35 pm
Posts: 211
Location: Florida
Car(s): 1968 Bellett 1300 2dr, 06 Scion XA ,05 Chrysler PT Cruiser GT Turbo HO
|
Square type headlight assembly for the pr10 Mark Attachment:
Headlight.jpg [ 53.83 KiB | Viewed 24524 times ]
|
| Wed Apr 15, 2009 10:56 pm |
|
|
|
JT191
Joined: Wed Sep 24, 2008 10:05 am
Posts: 543
Location: 12,450 miles away from the Big Warehouse in Melbourne
|
antus wrote: PR91 wrote: late column splines are the same as TE gemini. Gemini TX-TG all had the same spline, so that'd mean any gemini hub would suit late model. I guess they never changed it when they stopped making Belletts and started making Isuzu Geminis. The same spline pattern for the late model carries over through at least 1993: all the RB/JT150/JT190 Geminis, JT151/JT191 Geminis, Piazza JR, Trooper, Bighorn, Rodeo, Jackaroo, Amigo, Pup, Pickup, probably Vehicross and Axiom too. There are several different adapters for these different vehicles, and the difference appears to be the offset or depth between the mounting surface on the column and the mounting surface for the wheel (how far away or how close the wheel is to the driver). That and 12mmx1.5 lug nuts appear to be the only two things that carry over for that wide a range. Almost everything else makes it seem almost like the early and later cars were from two different manufacturers (as far as interchangeability is concerned).
|
| Thu Apr 16, 2009 1:36 am |
|
|
|
BELLETTPR10
Joined: Thu Sep 25, 2008 8:35 pm
Posts: 211
Location: Florida
Car(s): 1968 Bellett 1300 2dr, 06 Scion XA ,05 Chrysler PT Cruiser GT Turbo HO
|
Hey all, isnt the spline talk way off the original thread? please ....
Regards
Mark
|
| Thu Apr 16, 2009 2:30 am |
|
|
|
C716
Joined: Sun Nov 23, 2008 3:20 pm
Posts: 7
Car(s): 1965 Mustang
|
BELLETTPR10,
Nice Pics on the breakdown of the "single headlamp" version. Of all the searches I have done on different flavour Bellets, the single headlight variety appears to be a rarity.
Oh yes, in answer to your question, Yes, this thread DID get sidetracked. This happens when people dont pay attention to detail.
C716
|
| Thu Apr 16, 2009 3:47 pm |
|
|
|
BELLETTPR10
Joined: Thu Sep 25, 2008 8:35 pm
Posts: 211
Location: Florida
Car(s): 1968 Bellett 1300 2dr, 06 Scion XA ,05 Chrysler PT Cruiser GT Turbo HO
|
Hey.....
Thanks to all
Mark
Last edited by BELLETTPR10 on Fri Feb 11, 2011 11:27 pm, edited 1 time in total.
|
| Thu Apr 16, 2009 4:41 pm |
|
|
Who is online |
Users browsing this forum: No registered users and 2 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
|
