Very nicely done, looks the part and sounds like it goes alright too! The fuel rail idea is really good solution!

Nice idea. In terms of the ECU code there is a message schedule table that is used for the BCM anti-theft stuff, it can be modified and adapted to automatically schedule a mode 1 frame to be sent automatically fairly easily.

Nice pictures :) If you are running the same code base there shoulc be no hiccup at all, idle or full throttle. The only difference being the calibration data and how that effects the engine. Running a different code base the engine must be off and really should disconnect battery to clear the RAM b...

The best way is a 4k7 or 10k resistor from VCC to pin 27 (Address Line 14). Then ground the pin 27 to select the lower address range, 0x0000 to 0x4000 - in terms of ECU memory mapping thats 0x8000 to 0xC000. Leave the pin open and you will get 0x4000 to 0x7FFF (0xC000 to 0xFFFF). Remove the pin from...

delcowizzid wrote:would that spare 5 volt input be on the pin above the pin the factory o2 goes into i here thats the spot.

Yeah that would be the one. Pin D8 would be the likely input for a wideband, the factory narrowband O2 input is D7.

nice one ryan im awaiting a wideband controller from alan at 14point7 too arrive in the near future for testing hes been generous enough to offer one up for testing and evaluation purposes for us im hoping he may even send a NAW to test as well i could see this being put into a lot of 808 ecu's in ...

This is a feature that is high on the list of to do's. First step is to have the wideband value as a part of the ALDL frame, keeps it nicely in sync with other values :) I will be releasing a $12 based bin shortly with some extra communication modes, once thats out there work will begin on getting a...

The DIS-4 is a CDI igntion booster, handy but if you have a resonable inductive setup it may not be needed. But you will still need to add an ignition module between the coils and the haltech, it can only drive a module not the coil directly. May also need different coils if they have been changed f...

That is one awesome rig man! Lookin forward to seeing it in action with the 37s (?)!! Will need to visit the icelandic boys for some flares

The MSD is not called a May Suddenly Die for no reason! haha

May just be a dirty pickup?? What type of pickup are you using??